中国科技核心期刊
美国化学文摘社（CAS）数据库
美国EBSCO学术数据库
日本科学技术振兴机构数据库(JST)
四川某低品位难选铜镍硫化矿石选矿试验研究
- 作者：
- 雷力|曹欣|徐建伟|赵华伦|王恒峰|李玺
- 作者单位：
- 四川省冶金地质勘查院&四川西冶检测科技有限公司|四川省冶金地质勘查院&四川西冶检测科技有限公司|四川省冶金地质勘查院&四川西冶检测科技有限公司|四川省冶金地质勘查院&四川西冶检测科技有限公司|四川省冶金地质勘查院&四川西冶检测科技有限公司|四川省冶金地质勘查院&四川西冶检测科技有限公司
基金项目：
- isnull
详细信息：
- 作者简介：
- 雷力（1984—），男，高级工程师，硕士，从事选矿工艺及资源综合利用研究工作；E-mail：leiliwings@126.com
- 通讯作者：
- 曹欣（1985—），女，工程师，硕士，从事分析测试技术研究工作；E-mail：418021942@qq.com
- PDF下载
Experimental study on the beneficiation of a low-grade refractory copper-nickel sulfide ore in Sichuan
- English Author：
- Sichuan Metallurgical Geological Exploration Institute&Sichuan West Metallurgical Testing Technology Co.,Ltd.|Sichuan Metallurgical Geological Exploration Institute&Sichuan West Metallurgical Testing Technology Co.,Ltd.|Sichuan Metallurgical Geological Exploration Institute&Sichuan West Metallurgical Testing Technology Co.,Ltd.|Sichuan Metallurgical Geological Exploration Institute&Sichuan West Metallurgical Testing Technology Co.,Ltd.|Sichuan Metallurgical Geological Exploration Institute&Sichuan West Metallurgical Testing Technology Co.,Ltd.|Sichuan Metallurgical Geological Exploration Institute&Sichuan West Metallurgical Testing Technology Co.,Ltd.
- Unit：
- 摘要
- 在线预览
- 参考文献
摘要:
四川某低品位难选铜镍硫化矿石含铜0.22 %、镍0.47 %，矿石中含铜、镍矿物工艺粒度细微，铜镍极难实现有效分离，故采取直接浮选方法获得铜镍混合精矿，并详细考察了磨矿细度、抑制剂、调整剂等影响因素。结果表明：在磨矿细度-74 μm占70 %，经一次粗选、两次扫选、三次精选浮选工艺流程，可获得产率5.88 %、铜品位3.31 %、镍品位5.92 %、铜回收率86.60 %、镍回收率73.84 %的铜镍混合精矿，选矿试验指标较好。
关键词:
铜镍硫化矿；粗磨；低品位；混合精矿；高冰镍；浮选
Abstract:
A low-grade refractory copper-nickel sulfide ore in Sichuan contains 0.22 % copper and 0.47 % nickel.The ore contains copper and nickel minerals in fine particles,and it is very difficult to effectively separate copper and nickel.Therefore,direct flotation is adopted to obtain copper-nickel mixed concentrate.The study thoroughly investigated the influence factors such as the grinding fineness,the inhibitor,and the modifier.The results show that when the grinding fineness -74 μm accounts for 70 %,through the flotation process of once roughing,twice scavenging and three times refining,a copper-nickel mixed concentrate with a yield of 5.88 %,a copper grade of 3.31 %,a nickel grade of 5.92 %,a copper recovery of 86.60 % and a nickel recovery of 73.84 % can be obtained.The test indexes of copper-nickel beneficiation are good.
Keywords:
copper-nickel sulfide ore;rough grinding;low grade;mixed concentrate;nickel matte;flotation
