• captcha

中国科技核心期刊

美国化学文摘社(CAS)数据库

美国EBSCO学术数据库

日本科学技术振兴机构数据库(JST)

期刊导读

首页   >    矿业工程

某高硫含砷低品位金精矿选矿工艺研究

  • 刘慧|赵福财|王苹|王路平|臧文优|刘传震|豆娜
  • 作者单位:
  • 山东国环固废创新科技中心有限公司|山东国环固废创新科技中心有限公司|山东国环固废创新科技中心有限公司|山东国环固废创新科技中心有限公司|山东国环固废创新科技中心有限公司|山东国环固废创新科技中心有限公司|山东国环固废创新科技中心有限公司
  • 基金项目:

  • isnull
  • 详细信息:

  • 作者简介:
  • 刘慧(1985—),女,工程师,硕士,从事选矿方面研究工作;E-mai:lhui566@163.com
  • 通讯作者:
  • isnull
  • PDF下载

Study on the beneficiation process of a high-sulfur and arsenic-bearing low-grade gold concentrate

  • English Author:
  • Shandong Guohuan Solid Waste Innovation Technology Center Co.,Ltd.|Shandong Guohuan Solid Waste Innovation Technology Center Co.,Ltd.|Shandong Guohuan Solid Waste Innovation Technology Center Co.,Ltd.|Shandong Guohuan Solid Waste Innovation Technology Center Co.,Ltd.|Shandong Guohuan Solid Waste Innovation Technology Center Co.,Ltd.|Shandong Guohuan Solid Waste Innovation Technology Center Co.,Ltd.|Shandong Guohuan Solid Waste Innovation Technology Center Co.,Ltd.
  • Unit:
  • 摘要
  • 在线预览
  • 参考文献

摘要:

为提高某高硫含砷低品位难处理金精矿选别指标,分别采用尼尔森离心重选和高效旋流器分级工艺进行金精矿分选试验研究?试验结果表明:在保障金精矿冶炼净返系数等级的基础上,采用试验条件为重力倍数60G?反冲洗水量4 L/min?给矿速度400 g/min的尼尔森离心重选工艺,可获得金品位为30.97 g/t,金回收率为19.97 %的重选精矿;采用试验条件为矿浆浓度20 %?沉砂口直径22 mm的高效旋流器分级工艺,可获得金品位为26.02 g/t,金回收率为12.50 %的溢流?尼尔森离心重选?高效旋流器分级工艺可使最终精矿产品的金回收率分别提高1.6 %~1.9 %和0.7 %~1.0 %?考虑到尼尔森离心重选工艺成熟工艺少?后期投资高,故推荐高效旋流器分级工艺进行该金精矿分选试验,以提高该金精矿利用价值?

关键词:

高硫;含砷;难处理金精矿;尼尔森离心重选;高效旋流器分级

Abstract:

In order to improve the separation indicators of a high-sulfur and arsenic-bearing low-grade refractory gold concentrate,the experiments of Nelson centifugal gravity separation and hydrocyclone classification processes were conducted.The experimental results showed that based on ensuring the net recovery factor grade of the gold concentrate smelting,a gold concentrate with a grade of 30.97 g/t and a gold recovery of 19.97 %could be obtained under the experimental conditions of a gravity multiplier of 60G,back flush water volume of 4 L/min,and a feeding rate of 400 g/min in the Nelson centrifugal gravity separation process.Likewise,a high-grade gold concentrate with a grade of 26.02 g/t and a gold recovery of 12.50 % could be obtained under the experimental conditions of a pulp concentration of 20 % and an underflow diameter of 22 mm in the high-efficiency hydrocyclone classification process.Nelson centrifugal gravity separation and high-efficiency hydrocyclone classification processes can improve the gold recovery rates of the final concentrate products by 1.6 %-1.9 % and 0.7 %-1.0 %,respectively.Considering the less mature technology and higher investment in the Nelson centrifugal gravity separation process,it is recommended to carry out the beneficiation experiment using the high-efficiency hydrocyclone classification process to enhance the utilization value of the gold concentrate.

Keywords:

high sulfur;arsenic-bearing;refractory gold concentrate;Nelson centrifugal gravity separation;high-efficiency hydrocyclone classification