• captcha

中国科技核心期刊

美国化学文摘社(CAS)数据库

美国EBSCO学术数据库

日本科学技术振兴机构数据库(JST)

期刊导读

首页   >    安环与分析

大西沟铁矿边坡稳定性数值模拟研究

  • 作者:
  • 李有仓|胡聪|王亚强|赵彦锋|尹龙|汪朝|郭进平
  • 作者单位:
  • 陕西大西沟矿业有限公司|西北有色地质矿业集团有限公司|陕西大西沟矿业有限公司|陕西大西沟矿业有限公司|西北有色地质矿业集团有限公司|西安建筑科技大学资源工程学院|西安建筑科技大学资源工程学院
  • 基金项目:

  • 国家自然科学基金面上项目(12272284);陕西省自然科学基础研究青年项目(2022JQ-349,2023-JC-QN-0443);中国博士后科学基金面上资助项目(2022MD713784);陕西省博士后一等资助科研项目(2023BSHYDZZ141)
  • 详细信息:

  • 作者简介:
  • 李有仓(1969—),男,高级工程师,从事地质工程工作;E-mail:116529385@qq.com
  • 通讯作者:
  • isnull
  • PDF下载

Numerical simulation study on the slope stability at Daxigou Iron Mine

  • English Author:
  • Shaanxi Daxigou Mining Co.,Ltd.|NWME Group Ltd.|Shaanxi Daxigou Mining Co.,Ltd.|Shaanxi Daxigou Mining Co.,Ltd.|NWME Group Ltd.|School of Resources Engineering,Xi’an University of Architecture and Technology|chool of Resources Engineering,Xi’an University of Architecture and Technology
  • Unit:
  • 摘要
  • 在线预览
  • 参考文献

摘要:

基于现场工程地质调查与室内岩石物理力学试验数据,对大西沟铁矿边坡岩体质量进行评价,确定了岩体的物理力学参数。采用数值模拟方法,对露天矿不同开采阶段的边坡应力、位移、滑移带及安全系数进行了分析,研究结果表明:边坡安全系数随台阶高度下降不断降低;自然条件下,边坡开挖不同阶段安全系数均在1.8以上,边坡稳定性较好。降雨对边坡的稳定性影响显著,饱和状态下终了边坡的安全系数降至1.36,但高于GB 51016—2014 《非煤露天矿边坡工程技术规范》规定的安全系数(1.25~1.20),说明矿山采场边坡设计参数合理。研究结果可为矿山后续安全设施设计提供参考依据。

关键词:

露天矿边坡;稳定性;数值模拟;安全系数;岩体质量评价;应力

Abstract:

Based on field geological surveys and laboratory rock physical and mechanical test data,the rock mass quality of the slope at Daxigou Iron Mine was evaluated,and the physical and mechanical parameters of the rock mass were determined.Using numerical simulation methods,stress,displacement,slip zones,and safety factors for the slope during different stages of open-pit mining were analyzed.The research results indicate that the safety factor of the slope decreases as the bench height increases.Under natural conditions,the safety factor in different excavation stages remains above 1.8,indicating good slope stability.Rainfall significantly affects slope stability,and under saturated conditions,the final slope’s safety factor decreases to 1.36.However,this is still above the safety factor (1.25-1.20) stipulated in GB 51016—2014 Technical Specifications for Open-pit Mining Engineering in Non-coal Mines,indicating that the mine’s slope design parameters are reasonable.The research results provide a reference for the design of subsequent safety facilities at the mine.

Keywords:

open-pit mine slope;stability;numerical simulation;safety factor;rock mass quality evaluation;stress