中国科技核心期刊
美国化学文摘社(CAS)数据库
美国EBSCO学术数据库
日本科学技术振兴机构数据库(JST)
郑银珠
Zheng Yinzhu
随着入选原矿品位逐渐下降,大冶有色下属铜矿山都面临着资源、环境和效益相互协调发展的问题。为了提高低品位铜矿的利用率及入磨品位,降低磨机能耗,引入了预选抛尾技术及装备用于矿物分选。研究采用STEINERT KSS组合式拣选机,利用双能量X射线透射(DE-XRT)和3D激光组合传感技术对大冶有色下属铜矿山铜矿石进行预抛废探索试验。试验结果表明,组合式拣选机对丰山铜矿矿石具有较好的预抛选效果,矿石在抛废率为 12 %的条件下,精矿产品铜回收率可达到98 %,铜品位由0.669 %提升至0.746 %,品位提升幅度为11.51 %,分选指标良好。
With the gradual decline in the head grade of run⁃of⁃mine ore, copper mines under Daye NonferrousMetals Group are facing the challenge of coordinating resource, environmental, and economic benefits. To improve theutilization of low⁃grade copper ores, increase the feed grade to the grinding circuit, and reduce mill energy consumption, itis necessary to introduce preconcentration technology for waste rejection and equipment for ore sorting. In this study, aSTEINERT KSS combined sorting machine, integrating dual⁃energy X⁃ray transmission (DE⁃XRT) and 3D laser sensortechnologies, was used to carry out exploratory preconcentration tests for waste rejection on copper ores from the company’smines. The test results show that the combined sorting machine achieves good preconcentration performance for oresfrom the Fengshan Copper Mine. Under a waste rejection rate of 12%, the copper recovery in the concentrate reached 98%,the copper grade of the concentrate increased from 0.669 % to 0.746 %, representing an 11.51 % increase in grade,and the separation indexes were satisfactory.