• captcha

中国科技核心期刊

美国化学文摘社(CAS)数据库

美国EBSCO学术数据库

日本科学技术振兴机构数据库(JST)

期刊导读

首页   >    分析测试

火试金法测定首饰中金量

  • 李桂华|山广祺|赵潇雪|祝培明|黄准|王萍|刘雪松
  • 作者单位:
  • 国家黄金钻石制品质量监督检验中心&山东省计量科学研究院山东省计量检测重点实验室|国家黄金钻石制品质量监督检验中心&山东省计量科学研究院山东省计量检测重点实验室|国家黄金钻石制品质量监督检验中心&山东省计量科学研究院山东省计量检测重点实验室|国家黄金钻石制品质量监督检验中心|国家黄金钻石制品质量监督检验中心&山东省计量科学研究院山东省计量检测重点实验室|国家黄金钻石制品质量监督检验中心&山东省计量科学研究院山东省计量检测重点实验室|国家黄金钻石制品质量监督检验中心&山东省计量科学研究院山东省计量检测重点实验室
  • 基金项目:

  • 山东省质量技术监督系统科技计划项目(2017KY12Z00)
  • 详细信息:

  • 作者简介:
  • 李桂华(1982—),女,山东聊城人,高级工程师,博士,从事贵金属材料检测及研究工作;济南市历下区千佛山东路28 号,国家黄金钻石制品质量监督检验中心,250014;E-mail:guihual12@163.com
  • 通讯作者:
  • isnull
  • 此文档没有上传!

Determination of gold content in jewelry by fire assay

  • English Author:
  • National Gold & Diamond Testing Center&Shandong Provincial Key Laboratory of Metrology and Measurement,Shandong Institute of Metrology|National Gold & Diamond Testing Center&Shandong Provincial Key Laboratory of Metrology and Measurement,Shandong Institute of Metrology|National Gold & Diamond Testing Center&Shandong Provincial Key Laboratory of Metrology and Measurement,Shandong Institute of Metrology|National Gold & Diamond Testing Center|National Gold & Diamond Testing Center&Shandong Provincial Key Laboratory of Metrology and Measurement,Shandong Institute of Metrology|National Gold & Diamond Testing Center&Shandong Provincial Key Laboratory of Metrology and Measurement,Shandong Institute of Metrology|National Gold & Diamond Testing Center&Shandong Provincial Key Laboratory of Metrology and Measurement,Shandong Institute of Metrology
  • Unit:
  • 摘要
  • 在线预览
  • 参考文献

摘要:

火试金法?舛ㄊ资沃薪鹆康挠跋煲蛩亟隙啵笛椴捎GB/T 9288—2006 《金合金首饰金含量的测定灰吹法(火试金法)》,考察了影响足金样品中金量检测结果的关键技术参数,并计算了方法的不确定度,分析了不确定度的主要来源。实验确定的最佳条件为银金质量比2.1,灰吹温度950 ℃,分金两次,每次30 min;扩展不确定度为0.42 ‰,最终测定结果为(996.94±0.42)‰(k=2);选用百万分之一天平进行称量,可有效降低结果的不确定度。

关键词:

火试金法;足金;灰吹温度;分金时间;不确定度

Abstract:

There are many factors influencing gold content determination in jewelry by fire assay.According to the national standard GB/T 9288-2006 Gold Alloy Jewelry,Gold Content Determination,Cupellation(Fire Assay),the paper investigated the key technical parameters that influence the gold content determination results of pure gold sample,calculated the uncertainty degree of the method,and analyzed the cause for the uncertainty.The test determined the optimal conditions:silver and gold mass ratio is 2.1,cupellation temperature is 950 ℃,gold splitting twice and each time for 30 min;expanded uncertainty is 0.42 ‰,and the final determination result is (996.94±0.42)‰k=2;weighting in one-millionth scale can effectively reduce the result uncertainty.

Keywords:

fire assay;pure gold;cupellation temperature;gold splitting time;uncertainty