• captcha

中国科技核心期刊

美国化学文摘社(CAS)数据库

美国EBSCO学术数据库

日本科学技术振兴机构数据库(JST)

期刊导读

首页   >    选矿与冶炼

热压氧化高压釜喷吹搅拌过程模拟研究

  • 作者:
  • 吕超|殷宏鑫|孙铭赫|于林辉
  • 作者单位:
  • 东北大学秦皇岛分校控制工程学院&营口东邦环保科技股份有限公司|东北大学秦皇岛分校控制工程学院|东北大学秦皇岛分校控制工程学院|营口东邦环保科技股份有限公司
  • 基金项目:

  • 国家自然科学基金青年基金项目(51904069);河北省自然科学基金青年项目(E2019501085)
  • 详细信息:

  • 作者简介:
  • 吕超(1985—),男,辽宁黑山人,副教授,研究方向为数值模拟、有色冶金及反应器设计;河北省秦皇岛市泰山路143号,东北大学秦皇岛分校控制工程学院,066004;E-mail:lvchao@neuq.edu.cn
  • 通讯作者:
  • isnull
  • 此文档没有上传!

Simulation of the blowing and stirring process in heatpressure oxidation autoclave

  • English Author:
  • School of Control Engineering,Northeastern University at Qinhuangdao&Yingkou Dongbang Environmental Science and Technology Co.,Ltd.|School of Control Engineering,Northeastern University at Qinhuangdao|School of Control Engineering,Northeastern University at Qinhuangdao|Yingkou Dongbang Environmental Science and Technology Co.,Ltd.
  • Unit:
  • 摘要
  • 在线预览
  • 参考文献

摘要:

高压釜是热压氧化法处理金精矿的常用设备。利用计算流体力学方法,采用FLUENT软件,以及标准k-ε湍流模型和Eulerian多相流模型,同时使用多重参考系法处理桨叶的旋转区域,对高压釜内部喷吹、搅拌过程进行了模拟研究,考察了高压釜内的速度场、组分分布,分析了搅拌转速和喷吹速度对气相分布的影响规律。结果表明:当搅拌转速为150 r/min,喷吹速度为0.7 m/s和0.8 m/s时,高压釜内速度场稳定,气相分布均匀,气液两相混合效果最好。

关键词:

高压釜;热压氧化;喷吹;搅拌;数值模拟;多重参考系;计算流体力学

Abstract:

Heat-pressure oxidation autoclave is common equipment for processing gold concentrates.As well as CFD method,FLUENT software,κ-ε standard turbulence model and Eulerian multiphase flow model were used while the rotating areas were processed by the MRF method so that the blowing and stirring process in the autoclave was simu-lated,velocity field and species distribution in the autoclave were investigated,and the effects of stirring speed and blowing speed on the distribution of gas phase were analyzed.The results show that when the stirring speed is 150 r/min and the blowing speed is 0.7 m/s and 0.8 m/s,the velocity field is stable and the gas phase is evenly distributed in the autoclave,with the best mixing effect of gas and liquid.

Keywords:

autoclave;heatpressure oxidation;blowing;stirring;numerical simulation;MRF;CFD